To submit an article online, and to check the status of your submission, you need to have an account with Romantic Textualities: Literature and Print Culture, 1780–1840
Don't have an account? Register Here.Start Submission
Submissions should be made electronically through this website.
Please ensure that you consider the following guidelines when preparing your manuscript. Failure to do so may delay the processing of your submission.
All word limits include referencing and citation.
To ensure blind peer review, please only list the title and abstract on the submitted manuscript file.
The names of all authors, affiliations, contact details, biography (optional) and the corresponding author details must be completed online as part of the submission process.
Author names should include a forename and a surname. Forenames cannot include only initials.
The affiliation should ideally include ‘Department, Institution, City, Country’, however only the Institution and Country are mandatory.
Research articles must have the main text prefaced by an abstract of no more than 300 words summarising the main arguments and conclusions of the article. This must have the heading ‘Abstract’ and be easily identified from the start of the main text.
A list of up to ten key words should also be placed below the abstract.
The Abstract and Keywords should also be added to the metadata when making the initial online submission.
The body of the submission should be structured in a logical and easy to follow manner. A clear introduction section should be given that allows non-specialists in the subject an understanding of the publication and a background of the issue(s) involved. Methods, results, discussion and conclusion sections may then follow to clearly detail the information and research being presented.
Up to three level headings may be present and must be clearly identifiable using different font sizes, bold or italics, or a numbering system. We suggest using Headings 1, 2 and 3 in MS-Word’s ‘Style’ section.
Supplementary Files (optional)
Any supplementary/additional files that should link to the main publication must be listed, with a corresponding number, title and option description. Ideally the supplementary files are also cited in the main text.
e.g. Supplementary file 1: Biographical data
Note: additional files will not typically be typeset so must be provided in their final form. They will be assigned a DOI and linked to from the publication.
Ethics and consent (if applicable)
Research involving human subjects, human material, or human data, must have been performed in accordance with the Declaration of Helsinki. Where applicable, studies must have been approved by an appropriate ethics committee and the authors should include a statement within the article text detailing this approval, including the name of the ethics committee and reference number of the approval. The identity of the research subject(s) should be anonymised whenever possible. For research involving human subjects, informed consent to participate in the study must be obtained from participants (or their legal guardian).
Any acknowledgements must be headed and in a separate paragraph, placed after the main text but before the reference list.
Funding Information (optional)
Should the research have received a funding grant then the grant provider and grant number should be detailed.
If any of the authors have any competing interests then these must be declared. A short paragraph should be placed before the references. Guidelines for competing interests can be found here. If there are no competing interests to declare then the following statement should be present: The author(s) has/have no competing interests to declare.
Papers submitted for review can follow US or UK conventions, and MHRA, MLA, Harvard or Chicago styles, as long as they are consistently applied. The final version of the text must adhere to the MHRA Style Guide, 3rd edn (available online at http://www.mhra.org.uk/pdf/MHRA-Style-Guide-3rd-Edn.pdf), which should be consulted in detail once your paper has been accepted. Below are some short guidelines on preparing copy for submission.
For the submission title:
Capitalise all nouns, pronouns, adjectives, verbs, adverbs and subordinate conjunctions (i.e. as, because, although). Use lowercase for all articles, coordinate conjunctions and prepositions.
Headings within the main text:
First level headings in the text should follow the same rule as the main title.
For lower-level subheadings, only capitalise first letter and proper nouns.
Headings should be under 75 characters.
Submissions must be made in British English and employ -ise/isation/ising endings.
When referring to proper nouns and normal institutional titles, the official, original spelling must be used.
American or English grammar rules may be used as long as they are used consistently and match the spelling format (see above). Please do not use the serial comma except in cases of ambiguity.
The font used should be commonly available and in an easily readable size. This may be changed during the typesetting process.
Underlined text should be avoided whenever possible.
Bold or italicised text to emphasise a point are permitted, although should be restricted to minimal occurrences to maximise their efficiency.
Use bullet points to denote a list without hierarchy or order of value. If the list indicates a specific sequence then a numbered list must be used.
Lists should be used sparingly to maximise their impact.
Use single quotation marks except for quotes within another speech, in which case double quotation marks are used.
Quotations that are longer than 50 words in length must be in an indented paragraph separate from the main text.
The standard, non-italicised font must be used for all quotes.
It must be clear from the text and/or citation where the quote is sourced. If quoting from material that is under copyright then permission will need to be obtained from the copyright holder.
Acronyms & Abbreviations
With abbreviations, the crucial goal is to ensure that the reader – particularly one who may not be fully familiar with the topic or context being addressed – is able to follow along. Spell out almost all acronyms on first use, indicating the acronym in parentheses immediately thereafter. Use the acronym for all subsequent references.
A number of abbreviations are so common that they do not require the full text on the first instance.
Examples of these can be found here.
Abbreviations should usually be in capital letters without full stops.
Common examples from Latin origin do not follow this rule and should be lower case and can include full stops.
Use of footnotes/endnotes
Use endnotes rather than footnotes (we refer to these as ‘Notes’ in the online publication). These will appear at the end of the main text, before ‘References’.
All notes should be used only where crucial clarifying information needs to be conveyed.
Avoid using notes for purposes of referencing, with in-text citations used instead. If in-text citations cannot be used, a source can be cited as part of a note.
Please insert the endnote marker after the end punctuation.
Symbols are permitted within the main text and datasets as long as they are commonly in use or have explanatory definition on their first usage.
Hyphenation, em and en dashes
There is no set rule on the use of hyphenation between words, as long as they are consistently used.
Em dashes should be used sparingly. If they are present, they should denote emphasis, change of thought or interruption to the main sentence and can replace commas, parentheses, colons or semicolons.
En dashes can be used to replace ‘to’ when indicating a range. No space should surround the dash.
For numbers up to one hundred, please spell the whole words. Please use figures for numbers 101 or higher. If statistical data are being discussed at length, you can use figures instead.
Only use commas to separate figures from ten thousand upwards: e.g. 1000, 10,000, 100,000.
We are happy for authors to use either words or figures to represent large whole figures (i.e. one million or 1,000,000) as long as the usage is consistent throughout the text.
If the sentence includes a series of numbers then figures must be used in each instance.
If the number appears as part of a dataset, in conjunction with a symbol or as part of a table then the figure must be used.
If a sentence starts with a number it must be spelt, or the sentence should be re-written so that it no longer starts with the number.
Do not use a comma for a decimal place.
Numbers that are less than zero must have ‘0’ precede the decimal point.
Units of measurement
Symbols following a figure to denote a unit of measurement must be taken from the latest SI brochure. See http://www.bipm.org/utils/common/pdf/si_brochure_8_en.pdf for the full brochure.
Formulae must be proofed carefully by the author. Editors will not edit formulae. If special software has been used to create formulae, the way it is laid out is the way they will appear in the publication.
Figures, including graphs and diagrams, must be professionally and clearly presented. If a figure is not easy to understand or does not appear to be of a suitable quality, the editor may ask to re-render or omit it.
All figures must be cited within the main text, in consecutive order using Arabic numerals (e.g. Figure 1, Figure 2, etc.).
Each figure must have an accompanying descriptive main title. This should clearly and concisely summarise the content and/or use of the figure image. A short additional figure legend is optional to offer a further description.
Figure titles and legends should be placed within the text document, either after the paragraph of their first citation, or as a list after the references.
The source of the image should be included, along with any relevant copyright information and a statement of authorisation (if needed).
If your figure file includes text then please present the font as Ariel, Helvetica, or Verdana. This will mean that it matches the typeset text.
NOTE: All figures must be uploaded separately as supplementary files during the submission process, if possible in colour and at a resolution of at least 150dpi (but ideally 300dpi). Each file should not be more than 20MB. Standard formats accepted are: JPG, TIFF, GIF, PNG, EPS. For line drawings, please provide the original vector file (e.g. .ai, or .eps).
Tables must be created using a word processor's table function, not tabbed text.
Tables should be included in the manuscript. The final layout will place the tables as close to their first citation as possible.
All tables must be cited within the main text, numbered with Arabic numerals in consecutive order (e.g. Table 1, Table 2, etc.).
Each table must have an accompanying descriptive title. This should clearly and concisely summarise the content and/or use of the table. A short additional table legend is optional to offer a further description of the table. The table title and legend should be placed underneath the table.
Tables should not include:
NOTE: If there are more columns than can fit on a single page, then the table will be placed horizontally on the page. If it still can't fit horizontally on a page, the table will be broken into two.
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
The text is double-spaced; uses a 12-point Times New Roman, Helvetica or Arial font; employs italics, rather than underlining; and all illustrations, figures, and tables can be placed within the text at the appropriate points, at the end of the document or as separate attachments. If at the end or separate, then clear indications of where images are to be positioned must be included in the main document.
Copyright is held by the author under normal circumstances. Cardiff University Press has first publication rights.
This work is made available under a CC BY-NC-ND (Attribution-NonCommercial-NoDerivatives) licence from Creative Commons. However, individual articles may be made available under a CC BY (Attribution) licence instead, at the request of their author(s).
The CC BY-NC-ND licence is the most restrictive of Creative Commons' six main licences, only allowing others to download the work and share it if they credit the author(s). They are not permitted to change the work in any way or use it commercially.
The CC BY licence lets others distribute, remix, tweak, and build upon the work, even commercially, as long as they credit the author(s) for the original creation. This is the most accommodating of licences offered by Creative Commons.
For further information about the licences please go to https://creativecommons.org/licenses/
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC-BY or CC BY-NC-ND) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is published by Cardiff University Press, a Diamond Open Access publisher. Unlike many Open Access publishers, Cardiff University Press does not charge any author fees.
Fee waivers do not apply at Cardiff University Press because our funding model does not rely on author charges.